Usb To Serial Rs232 Db9 Adapter Cable Pl Chipset ^HOT^
Click Here ->->->-> https://tiurll.com/2t1TRO
Easily add an RS-232 9-pin serial port to any computer with our PL2303-DB9 USB to Serial Adapter!This adapter will let you connect older serial devices to modern computers, for terminal services, data transferring, remote control, and programming. Supports baud rates from 75bps to 12Mbps, multiple stop bit and parity types.
This adapter replaces a legacy built-in or PCI serial port and features a fixed male port with screw in connection. For connecting devices that also have a male connector an inexpensive DB9 coupler or standard serial cable can be purchased separately.
Works with devices with RS-232 serial ports such as other PCs with RS-232 ports, Bluetooth serial adapters, telescopes, amateur radio gear, GPS receivers, routers, firewalls, modems, plotters, embedded character displays, scan tools, sonar units, embedded boards and many others. Specific devices include: Garmin eTrex GPS, Seiko Label Printer, iRobot Create, Cisco products with serial consoles, US Robotics Modems, NexStar telescopes, Equus Scan Tools, Uniden Hand Held Scanners, etc. Works with software like: HyperTerminal, TeraTerm, WinDBG, all open source serial software on Linux, etc.
We use only genuine Prolific serial chipsets in our adapter. Some inexpensive serial adapters use cloned Prolific serial chipsets that will not work with the latest Prolific drivers, both those available for download and the drivers embedded in Windows. Because we only use genuine Prolific chips, our adapter is always compatible with the latest drivers from Prolific.
The original Plugable PL2303-DB9 adapter with Prolific PL2303-HXD chipset has a blue plastic case, while the updated adapter with the Prolific PL2303-GT chipset has a brown plastic case for ease of identification.
Following the installation instructions provided by the manufacturer of your serial devices, install any needed software or drivers. Connect the serial device to the adapter, and make any needed settings, such as COM port, baud rate, flow control, stop bits, etc.
The Plugable USB serial adapter allows you to connect legacy devices that use RS232 serial communications to computers that do not have a serial port. Although this usually works well, a number of problems can crop up because many of the devices people want to connect are older devices with various issues. A frequent problem is that the software that is necessary to connect to the device does not work under modern operating systems such as Windows 7 or above. Other problems can include using an improper cable, incorrect port settings, or a basic incompatibility between the Plugable USB serial adapter and the device it is being connected to.
In Windows, serial communications proceed through a COM port that is assigned by Windows when the USB serial adapter is plugged in. You can find out this COM port by opening Device Manager, going to Ports (COM & LTPT) and looking for Prolific USB-to_Serial Comm Port (COM#). The # symbol represents the port number of the COM port assigned by Windows. This port must be set correctly in whatever application is trying to communicate through that port.
USB DB-9 Serial 72 inch RS-232 Adapter cable for connecting to serial devices without the need for an extension. This cable features RX/TX and Power LEDs indicators while it utilizes a Prolific Chipset.
FTDI CHIP Adapter with RX/TX and Power LED . Now Supports OS X and VISTA! Want to connect your GPS to your PC but dont have a 9-pin serial port connection? This cable will get you hooked. Using this converter cable and the PC interface cable for your unit, you can transfer maps, waypoints, routes and tracks between MapSource and your GPS. USB to RS232 converter cable your computer shows it like a standard COM port! New Jet Black Ultra-Flexi cable 6ft. cable 72inch end to end (usb to serial DB-9 port)
Now you can easily connect your Magellan GPS receiver to the USB port of your PC with this DB-9 to USB adapter cable. Magellan data cable accessories come standard with a DB-9 connector, compatible with the DB-9 port on your computer. If your computer does not come equipped with a DB-9 port, simply plug-in this USB serial accessory adapter and connect your Magellan GPS receiver via your USB port to download maps and other software.
The PL-2303 Prolific serial adapter is your smart and convenient accessory for connecting RS-232 serial devices to your USB-equipped Windows host computer. It provides a bridge connection with a standard DB 9-pin male serial port connector in one end and a standard USB plug on the other end. You simply attach the serial device onto the serial port of the cable, and then plug the USB connector into your PC USB port. It allows a simple and easy way of adding serial connections to your PC without traditional port configuration.
This USB to Serial adapter is ideal for serial connections for up to 1Mbps of data transfer rate. Furthermore, USB does not require any IRQ resource, more devices can be attached to the system without the hassles of device and resource conflicts.
Finally, the PL-2303 USB to Serial adapter is a fully USB specification compliant device and therefore supports advanced power management such as suspend and resume operations as well as remote wakeup. The Prolific USB serial cable adapter is designed to work on all Windows operating systems.
FTDI CHIP Adapter with RX/TX and Power LED . Now Supports OS X and VISTA! Want to connect your GPS to your PC but dont have a 9-pin serial port connection? This cable will get you hooked. Using this converter cable and the PC interface cable for your unit, you can transfer maps, waypoints, routes and tracks between MapSource and your GPS. USB to RS232 converter cable your computer shows it like a standard COM port! New Jet Black Ultra-Flexi cable 1ft. cable 12inch end to end (usb to serial DB-9 port)
Supporting data transfer rates up to 921.6 Kbps, the USB to serial cable is a convenient and cost-saving solution for providing serial connectivity to devices such as point-of-sale terminals, serial modems, industrial equipment, and a wide variety of other RS232 peripherals.
You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session. When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.
Serial Attached SCSI Cables are a point-to-point serial protocol that moves data to and from computer-storage devices such as hard disk drives and tape drives. We offer various types of SAS cables including various SFF interface cables.
USB TO RS232 SERIAL - Connect legacy DB-9 serial communications devices to a modern computer with USBLEGACY SUPPORT - Add a 9-pin DB9 RS-232 serial port to any modern computer, replaces built-in or PCIe serial adapters, recommended for use with a serial cable or NULL modem cableFLEXIBLE - Programmable baud rate from 75 bits per second to 128,000 bits per second. Plug-and-play creation of a COM port. Powered by USB; no external power neededCOMPATIBLE - Genuine Prolific PL-2303HXD Chipset for widest possible compatibility with Windows (11, 10, 8.x, 7, Vista, and XP), Mac, Linux, and other platforms2 YEAR WARRANTY - We love our Plugable products, and hope you will too. All of our products are backed with a 2-year limited parts and labor warranty as well as Seattle-based email supportOverviewFeatures a Prolific PL-2303HX Rev D chipset for the best combination of performance and wide driver support. Drivers available for Windows 11, 10, 8.1, 8. 7, Vista, XP, macOS/Mac OS X 10.6 and later; open source drivers included in Linux kernel 2.4.31 and later. Windows 7 - 11 automatically detects and guides driver install without disk. Not compatible with ARM-based Windows (MS Surface).CompatibilityWorks with devices with RS-232 serial ports like: other PCs with RS-232 ports, Bluetooth serial adapters, PDAs, GPS receivers, routers, firewalls, modems, printers, embedded character displays, scan tools, sonar units, embedded boards, etc. Works with software like: HyperTerminal, TeraTerm, WinDBG, all open source serial software on Linux, etc.Connector compatibility noteThe DB9 connector has fixed female side screw in connections. For connecting to a device that also has fixed female side connectors an inexpensive DB9 Female/Female Mini Gender Changer (Coupler) will be needed.GenuineWe use only genuine Prolific chips. There has been a problem with some USB serial adapters using clone chips not actually from Prolific. These adapters will not work with Prolific's latest drivers, thus won't have support on recent operating systems like Windows 7 - 11. Because we only use genuine Prolific chips, our adapter is always compatible with the latest drivers from Prolific. More from the Manufacturer
It should work if it has a FTDI chipset, and will probably work if it has a Prolific chipset. Some other chipsets like the CH340 are more problematic. We would not be able to provide technical support for diagnosing problems that appear to be caused by the Insignia adapter if any arise; you would need to contact Insignia's technical support if you run into driver issues or similar problems.
\r\n\r\nUGREEN USB 2.0 to RS232 DB9 Serial Female Converter Adapter Cable with PL2303 Chipset 1.5M 20201 (Gray)\r\n\r\n \r\n\r\nUgreen USB to RS232 DB9 Serial Female Converter Adapter Cable is designed to connect serial devices such as DB9 equipped PCs, routers, GPS, barcode scanners, label writers, serial modems, digital cameras, card readers, palm PCs, Cellular Phones, PDAs, or ISDN Terminal Adapters through USB port with over 1Mbps data transfer rate.\r\n\r\n \r\n\r\n\r\n\tHOW IT WORKS: Ugreen USB to RS232 DB9 Serial Adapter is designed for connecting to serial devices such as DB9 equipped serial modems, ISDN Terminal Adapters, digital cameras, label writers, palm PCs, barcode scanners, PDAs etc through USB port with 1Mbps data transfer rate;\r\n\tCONNECTORS: With standard USB Type A Male to standard 9-pin DB9 RS-232 serial connector;\r\n\tCHIPSET & SUPPORTED OS: PL-2303 Chipset for widest possible compatibility with Windows (10\/8.1\/8\/7XP), Mac, Linux, etc;\r\n\tCONDUCTOR & SHIELDING: Tinned Copper Conductor(Wire guage#24#28) and triple shielding ensure the best data transfer rate. Powered by USB port, no external power adapter required. Simple installation, plug & play after one time driver installation;\r\n\r\n","image": " _product_images/product-5053/pr3bzDnk1647488799-420x420.jpg","offers": {"@type": "Offer","priceCurrency": "MYR","price": "28.00","availability" : " "}}{"@context": " ","@type": "BreadcrumbList","itemListElement": [{"@type":"ListItem","position":1,"item":{"@id":" =common/home","name":"Home"}},{"@type":"ListItem","position":2,"item":{"@id":" -usb-2-0-to-rs232-db9-serial-female-converter-adapter-cable-with-pl2303-chipset-1-5m-gray","name":"UGREEN USB 2.0 to RS232 DB9 Serial Female Converter Adapter Cable with PL2303 Chipset 1.5M 20201 (Gray)"}}]} 2b1af7f3a8